This target ID table is for a Minelab X-Terra 705 in coin and treasure mode with the stock 9-inch elliptical coil running at 7.5 kHz. ID's for the items I haven't found are from other diggers or the Minelab website. The most important thing to remember about accurately identifying targets when you're looking for coins and jewelry is the stability of the signal. If the numbers are jumpy or different when you change the direction of your swing, chances are it's trash. Unstable signals are usually caused by irregular surfaces like foil or a bent pull tab. Another clue is the size of the target response, is it small and concise or spread out? Use the pinpointing mode to nail this down.
Efficiently identifying trash and being confident in your ID only comes from lots of practice and digging lots of trash. I like to call exactly what I expect to find to myself before I dig it. When I'm wrong I put the item back under the plug and determine if there was something I missed. This type of high volume digging works best in a park setting where you know you will come across a lot of trash. When you head out to an old mining town or abandoned rail stop you'll want to go back to digging every thing until you can figure out if there specific types of trash you want to avoid (tin can lids). But all that park practice will payoff by letting you dial into those valuable targets much more quickly.
Efficiently identifying trash and being confident in your ID only comes from lots of practice and digging lots of trash. I like to call exactly what I expect to find to myself before I dig it. When I'm wrong I put the item back under the plug and determine if there was something I missed. This type of high volume digging works best in a park setting where you know you will come across a lot of trash. When you head out to an old mining town or abandoned rail stop you'll want to go back to digging every thing until you can figure out if there specific types of trash you want to avoid (tin can lids). But all that park practice will payoff by letting you dial into those valuable targets much more quickly.
X-Terra 705 Target ID's for US coins and Jewelry | |||
| Target | ID # | Target | ID # |
| Silver $1 | 46 | ||
| Large Cent | 44 | ||
| Barber Half | 44 | Zinc Cent | 28 - 32 |
| Walking Half | 44 | Indian Head 1 C | 24 - 32 |
| Franklin Half | 44 | Gold 22 K | 28 |
| Clad Half Dollar | 44 | Bottle Cap | 22 - 28 |
| Presidential $1 | 44 | Gold 18 K | 24 - 26 |
| Sacagawea $1 | 44 | $5 Gold Coin | 26 |
| Clad Quarter | 42 | Silver III Cent | 24 |
| Silver Quarter | 40,42 | $2.50 Gold | 24 |
| Two Cent | 42 | Flying Eagle Cent | 20, 22 |
| Seated Quarter | 40, 42 | 10 K Class Ring | 14, 16 |
| Rosey Dime | 38, 40 | Pull Tab | 12 -18 |
| Clad Dime | 38 | 40% Silv Nickle | 12 - 16 |
| $20 Gold | 38 | Titanium Ring | 10 - 14 |
| Mercury Dime | 36,38 | Clad Nickle | 12 |
| Seated Dime | 36, 38 | Shield Nickle | 12 |
| Barber Dime | 36, 38 | Buffalo Nickle | 12 |
| Wheat Cent | 34, 36, 38 | 14 K Lrg Ring | 12 |
| Sterling Ring | 34, 36 | V Nickle | 10 - 12 |
| Sterling Pendant | 34, 36, 38 | 14 K tiny Ring | 10 |
| $10 Gold | 34 | Stainless Ring | 6 - 8 |
![]() |
Photograph by Robert Clark. All artifacts owned by: Birmingham Museums and Art Gallery; Potteries Museum and Art Gallery, Stoke-on-Trent
|
Cathy Newman
Published March 6, 2013
In September 2009, David Booth, a park ranger in Stirling, Scotland, packed up his brand-new metal detector ("I practiced at home picking up nails and bits"), drove to a field, walked seven yards (six meters) from his parked car, and scored big. His first sweep with a metal detector yielded a spectacular find: four gold torques, or neck bands, from the first century B.C.—the most important hoard of Iron Age gold found in Scotland to date.
Several days later, Stuart Campbell of the National Museum of Scotland, the man in charge of "treasure trove" finds, as they are known in the United Kingdom, arrived at his Edinburgh office, opened his email to find a message with the subject "gold jewelry" and thought, "Oh, no, not another Victorian watch chain." Then he saw the images.
Thanks to laws in England and Scotland that encourage artifact hunters to cooperate with archaeologists, Booth was paid the current market price for the cache, about $650,000, set by the queen's and lord treasurer's remembrancer (the British crown's representative in Scotland). He split the sum with the landowner.
In England, Wales, and Northern Ireland, the Treasure Act of 1996 defines gold or silver finds older than 300 years as treasure and claims them for the crown. Finds must be reported within 14 days. Scotland's laws are broader: Treasure does not have to be gold or silver and can be less than 300 years old, but in both jurisdictions, a significant find will be offered to museums to bid on.
The spectacular hoard of Anglo-Saxon gold, silver, and garnet objects discovered in 2009 by Terry Herbert, an unemployed metal-detector enthusiast, was acquired by the Birmingham Museum and Art Gallery and the Potteries Museum and Art Gallery, Stoke on Trent. The assessed value of $5.3 million was split between Herbert and the owner of the Staffordshire field where it was found. (In December, about 90 more pieces of gold and silver were recovered from the same area.)
Britain's Amateur Treasure Hunters Strike Gold
Nearly 90 percent of archaeological artifacts in the U.K. are found by amateur treasure hunters with metal detectors. Michael Lewis, deputy head of portable antiquities and treasure at the British Museum in London, calls it "land fishing," adding that the law encourages treasure hunters to adopt best practices in metal detecting, such as recording the location of finds.
A related program, the Portable Antiquities Scheme, is a voluntary project, managed by the British Museum, to record archaeological objects—not necessarily treasure—found by members of the public. So far, the British Museum has documented 800,000 finds, everything from gold and silver artifacts to bits of pottery and iron. Taken in context and seen together, they give a picture of where and how people lived in the past.
The relationship between archaeologists and metal detector hunters is, for the most part, downright amiable. Each year, the British Museum reaches out to some 177 metal-detecting clubs and judges the year's "best" find.
U.S. Treasure Laws Lag
How do laws in the United States stack up? Fred Limp, president of the Society for American Archaeology, summed it up: "Basically, except for materials on federal land, state law applies and, with some exceptions, objects are the property of the land owner." There is no standard rule; it varies state to state.
Federal laws are strict. "A stone tool is property of the federal government in perpetuity," said Limp. "Its digging up is a violation of law and can be a felony." Depending on the state, the same object found on private land may or may not have protection.
In other words, "private landowners can dig up all the sites they want and sell on eBay," said Tom Green, director of the Arkansas Archeological Survey. A notable exception is burial sites. Nearly all states have laws forbidding the digging up of burial sites (where most of the best material is found—"like the good, fancy pots," explained Green).
What about exporting the British scheme to the United States?
"It wouldn't work here," said Chris Espenshade, a consulting archaeologist for Commonwealth Cultural Resources Group in Michigan. "It's contrary to our culture." It's the mindset of "It's my property and I'll do what I want" and an American individualism that expresses itself in "no trespassing" signs.
Furthermore, said Espenshade, "We don't have that kind of treasure in the United States. Most of the people out metal detecting aren't finding big money items. It's not a Celtic gold broach. It's a lead minie ball [an old bullet]."
Still, he admitted, the compensation afforded by the United Kingdom's laws mitigates the idea that a finder should give away a treasure and not get anything in return.
Limitations to the U.K. Treasure Act
The U.K. laws aren't perfect. Important finds have slipped through the cracks—notably a magnificent bronze Roman helmet found in Cumbria and auctioned off by Christie's in 2010 for $3.6 million to a private collector. (Because it was a single object and made of bronze, it didn't technically qualify as "treasure.")
But the laws seem to function well enough. Said Michael Lewis of the British Museum: "The Treasure Act works well because it ensures that important finds end up in museums for all to enjoy and that finders are rewarded. They are encouraged to do the right thing."
And Booth, the finder of the Iron Age hoard in Scotland? "It was nice to pay off the Ford Focus," he told a local newspaper. He's still hunting.
The two top selling all-purpose metal detectors in the world are the Minelab X-Terra 705 and the Garrett AT Pro. The AT Pro is probably the most widely marketed metal detector ever. Advertising aside, what makes a great all-purpose detector:
If you've made it this far your dilemma is..."which is the best all-purpose metal detector for me?" The last two words are the most important in this comparison. Where will you be detecting and what will you be looking for...that's the baseline.
The Minelab 705 takes the Flexibility category, due to it's V-flex technology; which means when you change coils the machine recognizes it and adjusts the search frequency. Generally, lower frequencies offer better sensitivity to copper and silver and better overall detection depth and trash rejection; while Higher frequencies are more sensitive to small metals and natural gold with a reduction in discrimination of nonferrous (not-of-iron) metals. The ability to swap the coils and truly change a single machine between a prospecting detector, a general park hunter, or a sharp shooting coin detector is still revolutionary. If you could dunk the Xterra 705 in the water, I would give a 10 of 10 for all-purpose flexibility.
The Garrett AT Pro holds its own in Flexibility with interchangeable coils and the ability to submerse the entire machine up to 10 feet. Fresh water detecting opens up a lot of productive areas. No matter what either manufacturer says neither of these detectors work well in salt water or on wet ocean beaches. Good saltwater beach detectors are simply a different beast all together.
Target ID on both machines is provided with variable audio tones and a numeric target ID. The Minelab has nearly twice the ID segments (28) which means it's slightly better in terms of specifically identifying a targets relative conductivity. Both machines provide you methods of determining if you are detecting "trash" or treasure, for example Iron Audio on the AT Pro.
Both detectors were air tested for Target Depth with the stock coils and maximum sensitivity using a silver dime and a 14 k gold ring. The Minelab Xterra hit the dime at 6.5" and the ring at 9.5". The Garrett AT Pro hit the dime at 5.5" and the ring at 8". Both are very respectable relative to other machines and depths you are likely to find these items. Of course both let you change the coil size to improve these numbers for specific types of targets.
I gave the AT Pro a bit higher of a score for Durability it's waterproof. Both detectors have good warranties and are backed by the two biggest and oldest detector manufacturers in the world. Both have very good manuals, informative videos, and good customer support. Garrett is touted by many as having the best customer service in the business.
So which all-purpose detector is the best Value...back to question number one! For general detecting at parks or old homes, both are very good. If you want to add detecting at the local lake or stream, then you should choose the Garrett AT Pro. If you want to add true nugget shooting for placer gold, then you should choose the Minelab X-Terra 705.
Personally, I have an Xterra 705. I live in the desert and love detecting for natural gold. I also spend a lot of my detecting hours at sports fields, old mining camps, pioneer camps, and abandoned homesteads. Do I wish I could detecting in the local fishing stream or lakes...of course. My answer to that was to buy a second detector that works in both salt and fresh water and can go to depths of 200 feet...because hey, if you're going in the water why limit yourself, right!
If you're buying a new detector check out Amazon or KellyCo online or go into a local metal detecting shop and get some personalized service.
Videos:
Minelab X-terra 705 Air tests
Minelab X-terra 70 gold prospecting - older version of the Xterra but great demo
X-terra 705 relic hunting
Garrett AT Pro relic hunting in a river - Beau has a great set of videos on his channel
AT Pro coin hunting in Australia
Garrett AT Pro coin and relic hunting
PLEASE SHARE your experiences and reviews of these two detectors. If you went through this dilemma how did you decide?
- Flexibility - Use in varied conditions, ability to change frequency, ability to change coil size and configuration.
- Target ID - Especially important for coin and relic hunting. Allows hunter to determine target size, conductivity, depth, and in the end ability to distinguish trash from treasure.
- Target Depth - Relative to the competition how deep can a machine locate specific targets.
- Durability - From design to construction materials how will the detector hold up and what kind of support will the company provide.
- Value - Simply cost versus benefits.
If you've made it this far your dilemma is..."which is the best all-purpose metal detector for me?" The last two words are the most important in this comparison. Where will you be detecting and what will you be looking for...that's the baseline.
The Minelab 705 takes the Flexibility category, due to it's V-flex technology; which means when you change coils the machine recognizes it and adjusts the search frequency. Generally, lower frequencies offer better sensitivity to copper and silver and better overall detection depth and trash rejection; while Higher frequencies are more sensitive to small metals and natural gold with a reduction in discrimination of nonferrous (not-of-iron) metals. The ability to swap the coils and truly change a single machine between a prospecting detector, a general park hunter, or a sharp shooting coin detector is still revolutionary. If you could dunk the Xterra 705 in the water, I would give a 10 of 10 for all-purpose flexibility.
The Garrett AT Pro holds its own in Flexibility with interchangeable coils and the ability to submerse the entire machine up to 10 feet. Fresh water detecting opens up a lot of productive areas. No matter what either manufacturer says neither of these detectors work well in salt water or on wet ocean beaches. Good saltwater beach detectors are simply a different beast all together.
Target ID on both machines is provided with variable audio tones and a numeric target ID. The Minelab has nearly twice the ID segments (28) which means it's slightly better in terms of specifically identifying a targets relative conductivity. Both machines provide you methods of determining if you are detecting "trash" or treasure, for example Iron Audio on the AT Pro.
Both detectors were air tested for Target Depth with the stock coils and maximum sensitivity using a silver dime and a 14 k gold ring. The Minelab Xterra hit the dime at 6.5" and the ring at 9.5". The Garrett AT Pro hit the dime at 5.5" and the ring at 8". Both are very respectable relative to other machines and depths you are likely to find these items. Of course both let you change the coil size to improve these numbers for specific types of targets.
I gave the AT Pro a bit higher of a score for Durability it's waterproof. Both detectors have good warranties and are backed by the two biggest and oldest detector manufacturers in the world. Both have very good manuals, informative videos, and good customer support. Garrett is touted by many as having the best customer service in the business.
So which all-purpose detector is the best Value...back to question number one! For general detecting at parks or old homes, both are very good. If you want to add detecting at the local lake or stream, then you should choose the Garrett AT Pro. If you want to add true nugget shooting for placer gold, then you should choose the Minelab X-Terra 705.
Personally, I have an Xterra 705. I live in the desert and love detecting for natural gold. I also spend a lot of my detecting hours at sports fields, old mining camps, pioneer camps, and abandoned homesteads. Do I wish I could detecting in the local fishing stream or lakes...of course. My answer to that was to buy a second detector that works in both salt and fresh water and can go to depths of 200 feet...because hey, if you're going in the water why limit yourself, right!
If you're buying a new detector check out Amazon or KellyCo online or go into a local metal detecting shop and get some personalized service.
Videos:
Minelab X-terra 705 Air tests
Minelab X-terra 70 gold prospecting - older version of the Xterra but great demo
X-terra 705 relic hunting
Garrett AT Pro relic hunting in a river - Beau has a great set of videos on his channel
AT Pro coin hunting in Australia
Garrett AT Pro coin and relic hunting
PLEASE SHARE your experiences and reviews of these two detectors. If you went through this dilemma how did you decide?



